Production Engineer

· Assigned as a Field Executive in Fluidised Catalytic Cracking unit

· Experienced in Handling of Fluidised Bed Based Catalyst Reactor and Regenerator.

 · Feed stock: Vacuum Gas oil From Crude Distillation After Hydrotreating done@180KBPSD.

· Familiar with Zeolite Catalyst Handling like loading and unloading.

· Experienced in Monitor and controlling the parameters of Distillation column.

· Technical Knowledge about Distillation and Absorption Sections.

 · Experienced in Handling of Centrifugal and Reciprocating Compressors & pumps , Backpressure   Steam Turbines.

· Familiar with the H2S absorption procedure used to remove H2S from Fuel Gas.

· Monitoring process parameters and to take corrective measures in case of abnormalities. Ensure accurate and proper functioning of all equipment in coordination with maintenance & other departments.

 · Well Known about all types of work permit like Cold work(Low Medium and High Risk), Hot work (Light & Heavy hot work), Line break permit , Confined space entry etc., including Scaffolding preparation, Work at height, Excavation job, and Electrical isolation, Check sheets, Authorizations, Special job deviations etc.

 · Collect and deliver Samples( Bomb, Bottle & open) in the Field for laboratory testing.

 · Safe handling of hazardous material and plant wastes contribute to housekeeping.

 · Performed Emergency drills of on-site emergencies, Equipment Positive isolation& LOTO(Lockout Tag out) procedure, HOTO(Handover Takeover) Procedure Vessel entry procedure, Nitrogen purging of the equipment to free Toxic gas and oxygen from the System.

 · Familiar with Operating of Fire Extinguishers, SCBA Set, Airline Respirators, Deluge Water System, Elevated Fire Monitors etc.,

 · Follow the HITRA(Hazard Identification & Task Risk Assessment) ,PIPA(Pre-Incident Planning Analysis) Procedures during & before attempting the job